Motorcycle Storehouse Speed Pulse Converter Twin Signals Output Universal for Universal
DescriptionSpeed pulse converter twin signals output universal
DetailsInstalls on top of the stock mechanical speedo drive cable. The converter-sensor sends electronic pulses, allowing you to run an electronic speedometer on a bike with a mechanical driven speedo drive. The sensor requires 12V and connects with three 120cm wires, current, signal and ground. The speedometer will require calibration. Wire length 650mm. Maximum dimension of the inner drive-square of the speedo cable cable is 2.54mm. Note: The stock mechanical speedometer can still be used, when desired, but when not in use the included cap can be installed to weatherproof seal the drive/converter unit.